Welcome to our UHF RFID Fixed Readers, designed to meet diverse business needs with exceptional performance and reliability. Whether you’re managing inventory, enhancing security, or optimizing supply chain logistics, our UHF RFID Fixed Readers provide the cutting-edge technology you need for seamless and efficient operations.

S-8600 4-Ports RAIN UHF RFID Fixed Reader

S-8600 4 Ports RAIN UHF Fixed Reader is a high performance 4-channel reader which can be well adapted to the installation requirements for indoor or outdoor environments for different application. The 4 ports RAIN UHF Reader is developed based on M-2800 UHF RFID reader module, its core chip uses Impinj’s INDY R2000.

S-8600 4 ports UHF RFID Reader is with high performance anti-collision algorithm, which make sure output power can be fine adjusted, which Two mutually backup power parity modules. Unless also damaged, the system can operate normally.

Advantages of S-8600 4 Ports UHF RFID Fixed Reader

– Using Impinj INDY R2000 chip
– Disposable cast aluminum body
– Multi-function
– Low-power design
– All industrial design

S-8600 4 Ports Rain Fixed RFID Reader Key Features

– Impinj R2000 Built-in
* Impinj Indy R2000 chip as RF transceiver.

– Anti-collision Algorithm
* Unique I – Search multi-tag identification algorithm providing the highest efficiency.

– Optimized Algorithm for Tags with Small Volume
* Optimized applications for small volume with better tags respond time.

– Dual CPU Architecture
* Main CPU: tag inventory; Assistant CPU: data management.
* Tag inventory and data transfer are parallel and simultaneous.

– Fast 4-Antenna Switch Inventory
* Every antenna’s inventory duration is configurable( Minimum Duration: 30 ms).
* Polling from ANT 1 to ANT 4.

– Two Modes for Inventory
* Buffer mode and Real-time mode.
* Tags will be stored as buffer under buffer mode.
* Tags will send data under real-time mode. This mode allows user to get tag data instantly.

– Hardware System Halt Detection
* Hardware CPU status surveillance.
* Run for 24 hours X 365 days without system halt.

– PA Health Surveillance
* PA status surveillance.
* Make sure PA never works under saturated state. Protected it for long term operation.

– 18000-6B/6C Full Compatible
*It can be switched rapidly between 18000-6B and 18000-6C tag.

– 18000-6B Large Data Read/Write
* Read 216 bytes in one time taking less than 500ms.
* Write 216 bytes in one time taking less than 3.5 seconds.
* It can read/write data with different lengths.

– Antenna Connection Detection
* Detect antenna connection.
* Protective for RF receiver.
* It can be canceled with command.

– Temperature Sensor
* Multi-point surveillance for accurate operating system temperature.

– Power Output Correction
* Dual modules making sure output power can be fine adjusted.
* Dual modules working and keeping correction unless they are both damaged.

– Excellent Cooling Design
* Heat dissipation and large cooling surface design.
* Thermal coupling interfaces using high-thermal conductivity solid materials which ensure stable performance under high temperature.

Customization Frequency Regions

– US, Canada and other regions following U.S. FCC
– Europe and other regions following ETSI EN 302 208 with & without LBT regulations
– Mainland China
– Japan
– Korea
– Malaysia
– Taiwan

S-8800 8-Port RAIN UHF Reader

S-8800 8 Ports RAIN UHF Fixed RFID Reader is a high performance 8-port reader which can be well adapted to the installation requirements for indoor or outdoor environments. S-8800 8 Ports UHF Reader is developed based on M-2900 RFID UHF reader module, its core chip uses Impinj’s Indy R2000.

Advantages of 8 Ports UHF RFID Fixed Reader

– Using Impinj’s Indy R2000 chip
– CNC aluminum alloy body
– Multi-function
– Low-power design
– All industrial design

S-8800 8 Ports Rain UHF Reader Key Features

– Impinj R2000 Built-in
*Impinj Indy R2000 chip as RF transceiver.

– Anti-collision Algorithm
* Unique I – Search multi-tag identification algorithm providing the highest efficiency.

– Optimized Algorithm for Tags with Small Volume
* Optimized applications for small volume with better tags respond time.

– Dual CPU Architecture
* Main CPU: tag inventory; Assistant CPU: data management.
* Tag inventory and data transfer are parallel and simultaneous.

– Fast 8-Antenna Switch Inventory
* Every antenna’s inventory duration is configurable( Minimum Duration: 30 ms).
* Polling from ANT 1 to ANT 4.

– Two Modes for Inventory
* Buffer mode and Real-time mode.
* Tags will be stored as buffer under buffer mode.
* Tags will send data under real-time mode. This mode allows user to get tag data instantly.

– Hardware System Halt Detection
* Hardware CPU status surveillance.
* Run for 24 hours x 365 days without system halt.

– PA Health Surveillance
* PA status surveillance.
* Make sure PA never works under saturated state. Protected it for long term operation.

– 18000-6B/6C Full Compatible
* It can be switched rapidly between 18000-6B and 18000-6C tag.

– 18000-6B Large Data Read/Write
* Read 216 bytes in one time taking less than 500ms.
* Write 216 bytes in one time taking less than 3.5 seconds.
* It can read/write data with different lengths.

– Antenna Connection Detection
* Detect antenna connection.
* Protective for RF receiver.
* It can be canceled with command.

– Temperature Sensor
– Multi-point surveillance for accurate operating system temperature.

– Power Output Correction
* Dual modules making sure output power can be fine adjusted.
* Dual modules working and keeping correction unless they are both damaged.

– Excellent Cooling Design
* Heat dissipation and large cooling surface design.
* Thermal coupling interfaces using high-thermal conductivity solid materials which ensure stable performance under high temperature.

Customization Frequency Regions

– US, Canada and other regions following U.S. FCC
– Europe and other regions following ETSI EN 302 208 with & without LBT regulations
– Mainland China
– Japan
– Korea
– Malaysia
– Taiwan

UHF RFID Fixed Reader S8000

S8000 UHF RFID Fixed Reader adopts IMPINJ’s INDY R2000 to increase performance and improve efficiency. This UHF RFID Fixed Reader delivers item visibility with good quality, high performance and reliability necessary for robust solutions. HUAYUAN UHF RFID fixed data terminal provides high performance coupled with full-featured computing and intuitive operation.

S8000 RAIN UHF RFID Fixed Reader Specification

Impinj R2000 Built-in: Based on Impinj R2000 module which is stable and mature.
Based on Free-scale Platform:  IMX6S(Solo) / IMX6DL(Dual) / IMX6Q(Quad), 800MHz vehicle grade CPU.
Compact Size:  133(L) x 84(W) x 22mm(H) Surprisingly compact CNC aluminum body, very convenient to deploy.
Online Upgrade: The OS kernel and APP can be updated online remotely.
POE Power: 25W max, IEEE 802.3 supported.
Wide Voltage: Wide voltage input range from DC6V to DC36V.
Powerful OS Based: Linux 4.9.11/ Android 7.0 (for Quad core CPU and 2G RAM only)
RAM + ROM: Spider-8000-Lite: 512MHz+4G (for Solo core CPU only)
Spider-8000: 1G+8G; 2G+16G/ 2G+32G (Optional)
HDMI Output Supported: HDMI D Type interface,peak transmission speed 5GB/s.
1080P, 720P supported.
Micro USB OTG Interface: USB 2.0OTG, MicroUSB interface.Compatible USB 2.0 Peripherals.
Dual-Band WIFI Supported: SMA interface for external 2.4G/ 5G antenna.
High-speed Internet Interface: 450M/ 100M/ 10M adaptive Ethernet.
GPIO: 4 inputs, 4 outputs. Up to 8kV isolation voltage.
Classy Industrial Design: Compact and artistic design with CNC aluminum material.

Anti-Collision Algorithm Comparison

Standard fixed Q algorithm
* Standard 18000-6C algorithm.
* The performance is reduced significantly when tag quantity gets larger.
* The efficiency is not high when tag quantity is small.

Impinj dynamic Q algorithm
* The algorithm of Impinj.
* It has a good efficiency for various tag quantities.
* It sacrifices some performance for the sake of compatibility.

– Search dynamic Q algorithm V1.0
* Based on Impinj dynamic Q algorithm.
* The performance is optimized.
* It’s the algorithm for firmware version 6.6 or below.

– Search dynamic Q algorithm V2.0
* Based on Impinj dynamic Q algorithm.
* It’s a brand new data structure, the performance of which is significantly improved for firmware version 6.7 or above.
* The improvement of performance can be easily sensed after the first round of inventory especially when the tag volume increases.

Notes:
1.The test is on same hardware platform in real applications (Taking Impinj dynamic Q algorithm as the reference which is marked with 100%).
2.The chart shows the comparison for the first round inventory performance.
3.It is tested on the same hardware platform.

UHF RFID Fixed Reader Physical and Electrical Characteristics

Dimensions: 133(L) x 84(W) x 22mm(H)
Weight: 0.9kg
Material: CNC Aluminum
Input Voltage: DC 6V ~ 36 V
POE Power: Supported
Operating Current: 1.5A +/-5% @ DC 12V Input
Operating Temperature: -20 °C ~ +85 °C
Storage Temperature: -40 °C ~ +85 °C
Operating Humidity: <95% ( +25 °C) Air Interface Protocol: EPC global UHF Class 1 Gen 2 / ISO 18000-6C Spectrum Range: 902Mhz – 928Mhz, 865MHz – 868MHz(Optional) Supported Regions: US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 Mainland China Japan Korea Malaysia Taiwan Output Power: 18 – 26 dBm Output Power Precision: +/- 1dB Output Power Flatness: +/- 0.2dB Receive Sensitivity: <-85dBm Peak Inventory Speed: >700 tags/ s
Tag RSSI: Supported
Antenna Detector: Supported
Ambient Temp Monitor: Supported
GPIO: 4 inputs, 4 outputs
OTG: USB 2.0 OTG
HDMI: HDMI D Type interface
Online Upgrade:L Supported
Heat Dissipation: Air cooling

UHF RFID Fixed Reader PIN Assignments

PIN ID Function
① HDMI: HDMI D Type interface
② GPIO: 4 inputs, 4 outputs.
③ POWER: DC 6V ~ 36V
④ Reset Reset
⑤ Ethernet: 450M/ 100M/ 10M adaptive Ethernet.
POE supported, 25W max, IEEE 802.3 supported.
⑥ WIFI: SMA interface for external 2.4G/ 5G antenna.
⑦ Micro USB: USB 2.0 OTG

Get in touch

For further information about Huayuan’s RFID readers & tags.

Please contact our sales team: contact@huayuansh.com