HUAYUAN Anti Metal NFC Tags

Why are Anti Metal NFC Tags different

Normally, NFC Tags placed on metal will not work due to interference from the metal. Because NFC Tags work by electromagnetic induction,metal can easily interfere with their operation. NFC Tags can never work behind metal and if placed directly onto metal, then you need to use a special anti metal NFC tags.

The reason NFC Tags don’t work on metal is that the metal surface behind the tag acts as a ground plane and reduces the performance of the tag’s antenna, effectively stopping it creating the current needed to power the chip.

In reality, you can often get the tags to work with just a small gap ( 0.5 – 1 cm ) and we know of many clients who just use thick foam type stickers to create a gap. However, to do the job properly, you should use on-metal tags which have a ferrite foil barrier between the tag and the adhesive layer.

The following products have a special isolation layer allowing them to work on metal, for instance when placed on a metallic laptop case or other metal environment.

On Metal NFC Tags Instruction

Anti Metal NFC Tags Optional

– Logo Printing
– Serial Number
– Laser Number or chip UID
– Chip Encoing
– Anti-metal layer
– 3M adhesive layer

Anti Metal NFC Tag Chip Available

– 13.56Mhz ISO14443A: MIFARE Classic ®, MIFARE ® DESFire ®, MIFARE Plus ®,  MIFARE Ultralight ®, Fudan FM11RF08, etc.
– ISO18092 13.56Mhz: NTAG® 203, NTAG® 210, NTAG® 212, NTAG® 213, NTAG® 215, NTAG® 216, Topaz512, etc.
– ISO15693 13.56Mhz: ICODE® SLI, Tag-it 2048, etc.

For further details, email: info@huayuansh.com

HUAYUAN
HUAYUAN
HUAYUAN had engaged in RFID R&D manufacturing for 22 years. Focusing markets in Europe and USA from 2002, We hope our rich experience can give you sophisticated consulting for identification, loyalty, access , automatic, inventory managment systems.
Recent Posts

Leave a Comment

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search