S-8600 4-Port UHF RFID Reader

In RFID Category

1. UHF RFID Reader S-8600 Product View

2

2. S-8600 4-Port UHF RFID Reader Key Features

  • Impinj R2000 Built-in
    *Impinj Indy R2000 chip as RF transceiver.
  • Anti-collision Algorithm
    *Unique I – Search multi-tag identification algorithm providing the highest efficiency.
  • Optimized Algorithm for Tags with Small Volume
    *Optimized applications for small volume with better tags respond time.
  • Dual CPU Architecture
    *Main CPU: tag inventory; Assistant CPU: data management.
    *Tag inventory and data transfer are parallel and simultaneous.
  • Fast 4-Antenna Switch Inventory
    *Every antenna’s inventory duration is configurable( Minimum Duration: 30 ms).
    *Polling from ANT 1 to ANT 4.
  • Two Modes for Inventory
    *Buffer mode and Real-time mode.
    *Tags will be stored as buffer under buffer mode.
    *Tags will send data under real-time mode. This mode allows user to get tag data instantly.
  • Hardware System Halt Detection
    *Hardware CPU status surveillance.
    *Run for 24hours X 365 days without system halt.
  • PA Health Surveillance
    *PA status surveillance.
    *Make sure PA never works under saturated state. Protected it for long term operation.
  • 18000-6B/6C Full Compatible
    *It can be switched rapidly between 18000-6B and 18000-6C tag.
  •  18000-6B Large Data Read/Write
    *Read 216 bytes in one time taking less than 500ms.
    *Write 216 bytes in one time taking less than 3.5 seconds.
    *It can read/write data with different lengths.
  • Antenna Connection Detection
    *Detect antenna connection.
    *Protective for RF receiver.
    *It can be canceled with command.
  • Temperature Sensor
    *Multi-point surveillance for accurate operating system temperature.
  • Power Output Correction
    *Dual modules making sure output power can be fine adjusted.
    *Dual modules working and keeping correction unless they are both damaged.
  • Excellent Cooling Design
    *Heat dissipation and large cooling surface design.
    *Thermal coupling interfaces using high-thermal conductivity solid materials which ensure stable performance under high temperature.

3. UHF RFID Reader S-8600 Electrical Characteristics

Dimension : 230mm(L) x 160mm(W) x 28mm(H)
Weight : 1.8 Kg
Body Material : Die-cast aluminum
Input Voltage : DC 12V ~ 18V
Standby Mode Current : <30mA
Sleep Mode Current : <100uA
Max Operating Current : 600mA +/-5% @ DC 12V Input
Operating Temperature : – 20 °C ~ + 55 °C
Storage Temperature : – 20 °C ~ + 85 °C
Humidity : < 95% ( + 25 °C)
Interface Protocol : EPC global UHF Class 1 Gen 2 / ISO 18000-6C / ISO 18000-6B
Spectrum Range : 860MHz – 960MHz
Supported Regions : US, Canada and other regions following U.S. FCC ; Europe and other regions following ETSI EN 302 208; Mainland China, Taiwan, Japan, Korea, Malaysia
Output Power : 0 – 33dBm
RF Connector : TNC/RP-TNC
Output Power Precision : +/- 1dB
Output Power Flatness : +/- 0.2dB
Receive Sensitivity : < -85 dBm Peak Inventory Speed : >700 tags/sec
Tag Buffer Capacity : 1000 tags @ 96 bit EPC
Tag RSSI : Supported
Antenna Detector : Supported
Ambient Temp Monitor : Supported
Working Mode : Single/DRM
Host Communication : RS-232 or TCP/IP
GPIO : 2 input optical coupling & 2 output coupling
Baud Rate : 115200 bps/38400bps
Heat Dissipation : Air cooling

4. UHF RFID Reader S-8600 Product Dimensions

S-8600-5S-8600-6

For further details about UHF RFID Reader, please email: info@huayuansh.com

HUAYUAN
HUAYUAN
RFID R&D and manufacturer since 1994 .
Recent Posts

Leave a Comment

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search